Honeycomb type core contributes nothing to the stiffness of a structural wall panels construction other than to create the two faces function as a unit. The stiffness, EI , of a given construction is therefore based completely upon the physical properties and dimensions of the two faces. Honeycomb cores are employed in the fabrication of lightweight structures. The core material is typically ’sandwiched’ between skins and plywood, aluminum, FRP composite material, steel, granite, solid surface materials, paper etc.
Honeycomb cores are made by selectively bonding layers of scored material and then expanding the stack to create a regular cellular structure. Alternative routes for their manufacture include corrugation accompanied by bonding and the extrusion of thermoplastics. Honeycomb aluminum honeycomb panel are used extensively for decking in both military and commercial aircraft. Typically, commercial aircraft flooring is about 1cm thick and is made of glass or carbon fibre reinforced epoxy skins with a Nomex honeycomb core.
Thus, since no deviation in pressure is made between the inside and the outside of the sandwich panel, the front and rear surface layers are prevented from being broken or removed from the honeycomb core. As a result, the sandwich panel with high durability can be obtained. Thus the panels are widely used in many industrial and commercial applications of the day-to-day life such as light trailer panels. Thus, each panel possessing some different features suitable for that particular environment. The panel itself is reversable and symmetrical so don’t worry about installing it backward.